Flair Pro 2

The Evolution of the Manual Lever The Flair 58+2 represents more than just a minor update; it is a refined response to years of user feedback in the manual espresso niche. While the core mechanics of a 58mm manual lever remain, this iteration targets the specific friction points that plagued its predecessors. The most significant shift away from the original design is the removal of the external temperature control box. By integrating the electronics into the base, the machine finally sheds the cluttered, prototype aesthetic of the first generation for something that feels like a finished kitchen appliance. Refined Power and Workflow Design Designers moved the power button to the base, which streamlines the interface but introduces a tactile compromise. The button feels like inexpensive plastic, a jarring choice for a machine positioned at a premium price point. However, the internal engineering shows more care. The PCB is encased in silicone, providing robust protection against water ingress—a critical consideration for a device that lives in a high-moisture environment. The Flair 58+2 also fixes a major workflow annoyance regarding the piston height. In previous models, water would immediately leak through the group head if the piston was down. The new design lowers the piston, allowing users to pour water into the chamber and let it preheat while they finish puck prep. This change removes the frantic rush often associated with manual levers, enabling a more methodical and relaxed brewing process. Thermal Stability and the 'Kick-Up' Effect Thermal management remains the primary challenge for non-boiler machines. Testing reveals that the Flair 58+2 maintains solid stability, though it exhibits an interesting temperature profile. Using boiling water at the highest electronic setting yields approximately 90°C in the chamber. However, there is a consistent temperature spike toward the end of the shot, where the water temperature can jump by 3-4 degrees. This "kick-up" is technically counter-intuitive for those seeking to avoid late-stage bitterness. As the puck erodes and resistance drops, increasing the temperature can over-extract undesirable compounds. Expert users might find better results by using the electric heater only for preheating the steel, then turning it off before the pull to rely on the natural temperature decay of the water. This mimics the profile of vintage spring levers, which many enthusiasts prefer for a cleaner finish. Accessories and Tactile Improvements The Flair 58+2 ships with a suite of upgraded accessories that justify its higher cost. The transition from mesh to magnetic billet puck screens is a highlight. While mesh screens may offer slightly higher extraction efficiency, they are notoriously difficult to clean. The billet screen, cut from solid stainless steel, is far more durable and simplifies maintenance. The inclusion of a palm tamper and a dedicated shot mirror allows for immediate pressure profiling feedback, turning the brewing process into a visual and tactile performance. The Direct Rivalry: Flair vs. Cafelat Robot No review of the Flair 58+2 is complete without a comparison to the Cafelat Robot. These machines represent two different philosophies of manual espresso. The Cafelat Robot is a triumph of simplicity and mechanical robustness. It requires no electricity and relies on the low thermal mass of its basket to maintain brewing temperatures. It is practically indestructible and offers a faster, no-fuss workflow. Conversely, the Flair 58+2 wins on flexibility and industry compatibility. Because it uses a standard 58mm portafilter, it opens the door to an endless world of third-party baskets and tools. While the Cafelat Robot is better for the minimalist traveler, the Flair is the superior choice for the coffee geek who wants to experiment with specific pressure profiles and high-end accessories. Final Verdict: Who Is It For? The Flair 58+2 is a specialized tool for the discerning home barista. It rewards patience and technical skill with espresso quality that rivals machines costing thousands more. It isn't perfect—the exposed wiring and plastic button are minor eyesores—but the improvements in workflow and thermal consistency make it a formidable contender. If you value the 58mm ecosystem and want an actively heated group head, this is currently the pinnacle of the Flair lineup.